USL UPC-2 - Manual (Page 5)

UPC-1/UPC-2 Installation Manual 5 January, 1999
UPC-1/UPC-2 INSTALLATION
UNPACK THE BOX AND VERIFY THAT ALL SHIPPING MATERIALS ARE PRESENT.
There should be:
FOR THE UPC-1 System Package
❏ One (1) System Manual
❏ One (1) IRC-20 Emitter/Modulator Unit
❏ One (1) IRP-20 AC Power Pack
❏ One (1) Mount Bracket
❏ Two (2) 10-32 X 5/8" machine screws for attaching the emitter to the mount bracket.
FOR THE UPC-2 System Package
❏ One (1) System Manual
❏ One (1) IRC-20 Emitter/Modulator Unit
❏ One (1) IRE-10 Emitter Panel
❏ Two (2) IRP-20 AC Power Packs
❏ One (1) Mount Bracket
❏ One (1) IRBS-20 Bracket Strap
❏ Two (2) 10-32 X 5/8" machine screws for attaching the emitter to the mount bracket.
YOU WILL NEED TO SUPPLY THE FOLLOWING MATERIALS:
❏ A small, jeweler’s type flat blade screwdriver or trim pot alignment tool for adjusting the
modulator gain, and a medium head screwdriver.
❏ Shielded audio cable for connecting the IRC-20 modulator to the program source, with
tie-wraps.
❏ Eighteen (18) gauge or greater two-conductor zip cord for the 24 V IRP-20 AC Power
Packs. (See tables, pages 6 & 7.)
❏ An electric drill with bits suitable for drilling into the surface where the Emitter will be
installed.
❏ Suitable metal or wood screws to attach the bracket to the wall.
❏ One (1) IRH-601 or IRH 701 Headset Receiver.
❏ AAA Batteries for the IR headset(s), if the type ordered does not come with its own
rechargeable cell.