Twin Eagles TESG-24N - Manual (Page 13)

TROUBLESHOOTING GUIDE
– Salamangrill
PROBLEM WHAT TO DO
Grill will not
fire-up
1) Push the igniter button and check for sparks. If no sparks or sparks
are weak, replace the battery.
2) If there is a spark, check if gas is supplied to the burner.
a) Visually check the electrode and wire while pushing the igniter
button. If a spark occurs anywhere but the igniter tip, the
igniter wire or igniter electrode must be replaced.
NOTE:
I. Cold start ignition may require multiple attempts for Infrared
Burner to ignite. This is normal with infrared burners especially
when an LP tank is installed for the first time since air could be
trapped in the flex hose.
II. It is normal to hear a popping sound when the IR grill burner
is first turned ON.
Low heat generated with
knob in HI-setting
1) Check for any bent or kinked fuel hose.
2) Check for proper gas supply and pressure.
3) Pre-heat grill for 2-3 minutes or until the IR burner glows red.
IR Burner
Extinguishes
1) Check for any burner defect
2) Check if gas supply is sufficient
3) Check if LP tank is empty
4) You might need to adjust the valve by turning the bypass screw
clockwise which is located in the valve and you can have access
to it by removing the knob.
12
NEED ASSISTANCE? PLEASE CALL:
(800) 422-0091