Power loss – TruTrak Sorcerer – Outdated User Manual
Page 14
13
off. Finally, when the bars have
been made to disappear and there
has been no speed change, the
bars can be ignored if they
reappear if it is known the aircraft
is close to being in trim.
Power Loss
If there is a momentary loss
of electrical power, the autopilot
will disengage. When this
happens it is necessary to do a
GYRO SET
before re-engaging
the autopilot. To accomplish this,
the aircraft must be held very
straight during which time the
encoder knob is pressed to do
GYRO SET
.
After this, engage
the autopilot and note the extent
to which
TRK
differs from
SEL
.
If this is more than 15
° repeat the
gyro set procedure. The
difference between
TRK
and
SEL
will be reduced at the rate of 8
°
per minute by the automatic gyro
centering system within.