Setting altimeter units – TruTrak Gemini PFD User Manual

Page 14

Text mode
Original mode

Setting Altimeter Units

The Gemini PFD has adjustable units for the
altimeter. These setting are accessed though the
same menu used to setup the V-‐Speeds and Speed
units. The selectable units for the altimeter are
Feet (FT), and Meters (M).

1-‐If the PFD is still in the Speed units setup mode,
advance to step 2 If not, the menu is accessed by
touching all three of the buttons on the left side of
the display. (Figure 1b)
2-‐Advance to the Altimeter units setup screen by

touching the lower right key (Figure 2b). The
lower left will show ALT when you reach the
Altimeter units setup screen.
3-‐Select the desired Altimeter units using the +

and – (Figure 3b)

Figure 1b

Figure 2b

Figure 3