Setting speed units – TruTrak Gemini PFD User Manual

Page 13

Text mode
Original mode

Setting Speed Units

The Gemini PFD has adjustable units for the
airspeed indicator and the ground speed indicator.
These setting are accessed though the same menu
used to setup the V-‐Speeds. The selectable units
for speed are Knots (KTS), Kilometers per hour

(KPH), and Miles per hour (MPH).

1-‐If the PFD is still in the V-‐speed setup mode,
advance to step 2 If not, the menu is accessed by
touching all three of the buttons on the left side of
the display. (Figure 1b)
2-‐Advance to the Speed units setup screen by

touching the lower right key (Figure 2b). The
lower left will show AS when you reach the Speed
units setup screen.
3-‐Select the desired Speed units using the + and –
(Figure 3b)

Figure 1b

Figure 2b

Figure 3b