Triner Scale TS-PFS Users Guide User Manual
Page 6
12
Triner Scale
TS-PFS User’s Guide
KEYPAD FUNCTIONS & SCALE FEATURES
Operation of the scale is controlled by the five keys on
the front panel keypad.
Subtract Key
Puts the scale in a mode that will subtract the next item
placed on the scale from the accumulated total.
Press the SUBTRACT key. A dash will display in the
readout, indicating subtract mode. Place the item to be
subtracted on the platform. The weight and item count
will be subtracted. The scale then returns to normal mode.
Reset Key (press and hold down)
Resets the totals memory in the scale.
-
Press and hold the RESET key until “reset” displays.
- “No” will then display, to prevent accidental erasing
of the memory
- Press the right arrow key (ADD/ON) to change the
display to “YES”
- Press the SET key (HOLD-RUN) to clear the scale’s
memory
To avoid resetting the memory, press the SET key when
“no” displays.
Important Note
:
the scale’s memory must be reset before
each new weigh session.
Zero Key
Zeroes out any positive or negative weight registered by
the scale’s electronics.
With nothing on the weighing platform, press the ZERO
key to manually zero the scale.
Off Key (press and hold down)
Powers off the scale.
Press and hold the OFF key to turn the scale off.
5
Triner Scale
TS-PFS User’s Guide
ZERO
OFF
HOLD
RUN
DISPLAY
MODE
SUBTRACT
RESET
SET
Weigh Session Example, Manual Add cont’d
GENERAL OPERATION
Adding One Weight Many Times
While in any mode, with the item on the platform, press the ADD
key, wait briefly for the scale to complete the calculation, then
repeat as needed.
Each time the item is added, a single beep will sound, confirming
that the item’s weight and count have been added.
ADD
ON
!
- Display shows item weight of 15.0 lb.
- Press ADD key to add weight.
- BEEP indicates item has been added
- Display momentarily shows totalized weight of 25.0 lb, then
reverts to item weight of 15.0 lb.
- Place next
item on scale.
10
lb
15
lb
Fig. 2
- Remove item
from scale.
- BEEP BEEP
indicates scale
has returned to
zero.
- Weigh session is
completed.
- Display shows 0.0 lb.
NOTE: Press the DISPLAY key at any time to view
Total Weight, Item Weight or Item Count.
The weigh session totals will remain in the scale’s memory
until the scale is RESET.
15
lb
10
lb