TriangleTube TTP Series - Manual (Page 4)

general Product Information
2
HIgH EffICIEnCy
The design of the plates creates two separate channels
for a true counter current flow movement. This complex
channel system results in high turbulence and high heat
transfer.
MaTErIalS
The standard TTP Braze Plate Heat Exchanger has
plates and connections made of AISI 316L stainless
steel. The brazing alloy is 99.9% copper. An optional
TTP Braze Plate Heat Exchanger with marine grade
stainless plates and nickel brazing material is available,
see Notice on page 3. The use of these materials pro-
vides a high degree of corrosion resistance and suitabil-
ity with a wide variety of fluids.
SElf ClEanIng
TTP Braze Plate Heat Exchangers operate with high tur-
bulence flow, even at low flow rates. This high turbu-
lence keeps small particles in suspension minimizing
fouling and scaling.
aPPlICaTIonS
TTP Braze Plate Heat Exchangers are suitable for a vari-
ety of single-phase fluid-to-fluid and two-phase refriger-
ant to fluid applications.
•
Fluid-to-Fluid
-
Domestic Hot Water production
- Floor Heating
- Snow Melting
- Swimming Pool and Spas - See Notice on page 3
- Industrial Liquid Cooling
- Engine / Hydraulic Oil cooling
• Two-Phase
-
Water cooled condensers
- Liquid Chillers
- Economizers
- De-superheaters
- Sub-coolers