Trending Accessibility Transitional & modern linear fusion shower pan surface mounted on concrete - Manual (Page 5)

Installation Guide
www.trendingaccessibility.com [email protected]
5
for linear shower pan surface mounted on concrete
Step 12
Make your final connections to the drain. Make
sure connection is snug but do not over tighten.
Step 9
Again while insuring that your pan has remained
level, drill and counter sink holes into the Linear pan.
Using cement anchors, attach the pan. Do not ag-
gressively screw and over tighten, as you may force
the Linear pan out of level.
If required you may drill and countersink
anywhere on the surface of the Linear
Shower Pan, not only the pre-marked
locations.
Step 11
Check that the Fusion Pan is level on all four sides.
Fill in any gaps around the perimeter of the pan over
1/8” with latex or acrylic caulk.
Do not use 100% silicone.
Step 10
Using a screed bed, bring the rest of the floor up to
the level of the Fusion pan.