Traxxas 59076-1 - Manual (Page 9)

SLAYER PRO 4X4 • 9
V/T - Voltage/Temp Sensor Port*
RPM - RPM Sensor Port*
BATT/CH5 - Battery
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Throttle Servo
CH1 - Steering Servo
CH1 - Channel 1*
*Not used
Your model is equipped with the Traxxas TQi 2.4GHz transmitter. The transmitter has two channels: Channel one operates the steering,
and channel two operates the throttle. The receiver inside the model has three output channels. Your model is equipped with two servos
and a receiver.
SLAYER PRO 4X4 WIRING DIAGRAM
Antenna
On/Off
Switch
Receiver
4-Cell
Battery Holder
Channel 1
Steering Servo
Channel 2
Throttle Servo
TRANSMITTER AND RECEIVER
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Throttle Neutral
Adjust
Steering Wheel
Power Switch Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 40 for more info
Link
Button
LED
Sensor Expansion
Port **
TRAXXAS TQ i RADIO SYSTEM TRAXXAS TQ i RADIO SYSTEM
** Accessory sensor port for use with TQi Telemetry Expander (see Traxxas.com and included materials for more information)