Traxxas 59076-1 - Manual (Page 5)

SLAYER PRO 4X4 • 5
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Your Slayer Pro 4x4 comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer,
to operate and maintain your model.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on radio
system batteries, see Use the
Right Batteries on page 10.
SUPPLIED TOOLS AND EQUIPMENT
REQUIRED TOOLS AND EQUIPMENT
(sold separately)
Glow plug
wrench
Extra
glow plug
1.5mm “L” wrench 2.0mm “T” wrench 2.5mm “T” wrench
Shock
wrench
Suspension
multi-tool
4-way wrench
Suspension tuning
shims and hollow balls
2.5mm “L” wrench
Extra oiled air filter set
(pre-filter and primary filter)
Air filter oil
Traxxas part #5263
8 AA alkaline batteries
Traxxas Top Fuel ™
see page 18
Small flat-blade screwdriver
for tuning (1/8 inch blade)
After-run oil to protect
the engine from corrosion
Fuel dispensing bottle
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
Antenna nut
wrench
NiMH 7.2V
battery pack*
NiMH 7.2V
battery charger*
*Battery and charger style are subject to change and may vary from images.
8mm/4mm wrench