Toa IR-300M - Manual (Page 8)

Notes
• When operating on rechargeable batteries, the optional IR-200BC Battery Charger is required.
• For rechargeable batteries, be sure to use the optional IR-200BT battery. Do not use other batteries.
7.1. How to Charge
Step 1. Set the infrared wireless microphone's power
switch to the OFF position.
Note
Be sure to turn off the microphone's power switch
when charging. Batteries cannot be correctly
charged if the power switch is ON.
Step 2. Place 2 IR-200BT rechargeable batteries in the
infrared wireless microphone.
(Refer to p. 7 "Battery insertion.")
Step 3. Fully insert the infrared wireless microphone into
the microphone receptacle of the IR-200BC
Battery Charger.
The IR-200BC's charging indicator lights red and charging begins.
Charging is completed in approximately 3 hours and the IR-200BC's full-charge indicator lights green.
(When charging the IR-200M microphone, attach the mounting adapter supplied with the charger.)
Notes
• If the red charging indicator does not light even if the infrared wireless microphone has been
inserted into the charger, check to see if the microphone has been correctly inserted.
• The infrared wireless microphone becomes warm after charging completion, however this is not a
failure.
Note: For more information, please read the instruction manual enclosed with the IR-200BC Battery Charger.
7.2. Charging Timing
As discharge progresses, the battery indicator's color gradually
changes from green to red. If the indicator lights red during use,
charge the infrared microphone immediately since the microphone
will be disabled several minutes after the indicator has lit red.
[Guidelines on the rechargeable battery operation time]
8
7. WHEN OPERATING ON RECHARGEABLE BATTERIES
When charging, never insert rechargeable batteries other than the
specified IR-200BT battery in the infrared wireless microphone.
Charging any other than the IR-200BT battery may result in fire or
personal injury due to battery rupture.
CAUTION
Notes
• When using the IR-200BT rechargeable battery for the first time or when using it after it has been stored for
a long period of time, be sure to charge it before use.
• The IR-200BT battery is designed to cycle through about 500 charges and discharges. When the
microphone operation interval becomes extremely short after prolonged repeated use, change the battery
with a new one.
[IR-200M's front view]
[IR-300M's top view]
Battery indicator
Battery indicator
Power selector switch* position
H
L
Continuous usage time
Approx. 5 hours
Approx. 8 hours
* Refer to p. 12 "About the power selector switch."
IR-200M
Power switch
Charging indicator (red)
Full-charge indicator (green)
IR-300M
IR-200BC (optional)
3
1