Toa IR-300M - Manual (Page 6)

6
5.2. IR-300M
1. Power switch / battery indicator
Turns on or off the microphone.
Turning on this switch causes its indicator to come
on, allowing it to also function as a battery
indicator.
This switch continuously lights green while the
battery is fully charged, and gradually changes to
red as the battery becomes weaker.
2. External microphone input terminal [MIC]
Used to connect a headset microphone or other
external microphone.
3. Infrared emitter
Transmits the infrared beam for communications.
4. Charging terminal
(Refer to p. 8 "How to Charge.")
5. Neck strap
Used to suspend the infrared wireless microphone
from the neck. (Refer to p. 10 "Infrared Wireless
Microphone Usage Tips.")
6. Battery cover
Contains the battery compartment.
Be sure to open and close the cover correctly.
(Refer to p. 7 "Battery Insertion.")
7. Color label attachment area
Attach optional color label to distinguish between
infrared wireless microphones.
8. Microphone level control
Used to adjust the input level when using an
external microphone. (Refer to p. 12 "About the
microphone level control.")
9. Power selector switch
Switches the power level of the infrared beam for
communications. (Refer to p. 12 "About the
power selector switch.")
10. Channel selector switch
Set the selector switch to the same channel as
that of the tuner. (Refer to p. 11 "Channel
settings.")
5
[Front]
[Top]
[Rear]
2
3
4 6 7
1
[Inside of the battery cover]
9
8 10
Built-in microphone