Toa YW-3500 User Manual

Page 4

7. SPECIFICATIONS

Notes
· The design and specifications are subject to change without notice for improvement.
· Power for the YW-3500 is supplied on a coaxial cable from the antenna input connector of the WT-3800.
· When power is supplied to the YW-3500, the red LED on the antenna base comes on.
· To minimize cable loss, use the RG-59/U or RG-6/U coaxial cable.

• Accessories
Tapping screw for wooden wall 4 x 25 ........................... 2
Machine screw for electrical wall box M3.5 x 20 ............ 2
RG-59/U sleeve .............................................................. 1

Power Source

8 – 10 V DC (supplied from amplifier or tuner)

Current Consumption

Under 24 mA

Receiving Frequency

169 – 216 MHz

Dipole Ratio Relative Gain

6 dB (including booster amplifier)

V.S.W.R

Under 2.6

Output Impedance

Ω

Mounting Hole Pitch

68.5 mm (dimensions for wiring box)

Finish

Antenna, bracket: Resin, off white

Operating Temperature

–10 to 50°C

Dimensions

197 (w) x 850 (h) x 32 (d) mm

Weight 200

Printed in Taiwan
1 3 3 - 0 7 - 2 1 7 - 2 0

6. SPECIFICATION OF THE COAXIAL CABLE

Note: Use an optional YA-641 (one piece) or CC-4901 (10 pieces) BNC connector for connecting the RG-

59/U and RG-6/U coaxial cables.

Cable Type

External Diameter

Max. Length

RG-59/U

6.1 mm

48 m

RG-6/U

7.4 mm

48 – 70 m

5.4. Insert the base into the frame.

Insert the base into the frame, then fix the base with
the two base fixing screws.

5.5. Attach the antenna elements to the

base.

Fixing screw

Base

Frame

Base

Antenna element