Toa M-864D Ver.2.0.0 - Manual (Page 8)

Digital stereo mixer M-864D
TOA Corporation 8/17
Status Request Command
Status Request(Channel fader gain position)
This command requests the M-864D to send its current channel fader gain position setting data.
The M-864D informs the current gain position.
F0H, 03H, 11H, ,
00H: Mono In channel
01H: Stereo In channel
02H: Mono Out channel
03H: Rec Out channel
When Channel Attribute=00H: 00H - 07H (Mono In channel 1 – 8)
When Channel Attribute=01H: 00H - 01H (Stereo In channel 1 – 2)
When Channel Attribute=02H: 00H - 03H (Mono Out channel 1 – 4)
When Channel Attribute=03H: 00H - 01H (Rec Out channel L,R)
Example of requesting Mono In channel 1’s EXT VOL fader gain position value data:
F0H, 03H, 11H, 00H, 00H
Status Request (Channel ON/OFF)
This command requests the M-864D to send its current channel ON/OFF setting status data.
The M-864D informs the current ON/OFF setting status.
F0H, 03H, 12H, ,
00H: Mono In channel
01H: Stereo In channel
02H: Mono Out channel
03H: Rec Out channel
When Channel Attribute=00H: 00H - 07H (Mono In channel 1 – 8)
When Channel Attribute=01H: 00H - 01H (Stereo In channel 1 – 2)
When Channel Attribute=02H: 00H - 03H (Mono Out channel 1 – 4)
When Channel Attribute=03H: 00H - 01H (Rec Out channel L,R)
Example of requesting Mono In channel 1’s ON/OFF setting status data:
F0H, 03H, 12H, 00H, 00H
Status request (Line Select)
This command requests to send the current line select ON/OFF setting status data on the M-864D side.
The M-864D transmits the current line select ON/OFF setting status data.