Toa D-901 - Manual (Page 25)

25
7. INPUT/OUTPUT GAIN SETTINGS
There are 3 possible setting methods.
7.1. Input and Output Channel Control Section Settings
Step 1. Press the desired Input (or Output) channel
selector key.
The selected channel's SEL indicator lights.
Note
When Group setting is performed, selecting
a channel in the group allows all SEL
indicators of the input channels grouped
together to light all at once.
Step 2. Rotate the Input (or Output) volume control
to set the gain.
Input/output gain setting range:
–INF (–∞) to +10 dB
ON
MIC BUS
FBS
EFFECT
8
7
6
5
1
2
3
4
5
6 12
11
10
9
8
7
INPUT OUTPUT
4
3
2
1
ON
SEL
+12dB
+6dB
0dB
-6dB
PEAK
-40dB
-20dB
-12dB
0N SIG SEL
SEL SIG 0N 0N SIG SEL
(Example: Input channel 1 gain setting)
1
2
7.2. Input/Output Gain Setting Screen Operation
Step 1. Press the desired Input (or Output) channel
selector key.
Step 2. Using the Screen shift key, display the input
(or output) gain setting screen.
Step 3. Rotate the Setting knob to set the gain.
Input channel 1
gain setting
Input channel 12
gain setting
Output channel 1
gain setting
Output channel 8
gain setting
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
I N 1 ] [ O U T 1 ]
– I N F d B 0 . 0 d B
I N 1 2 ] [ O U T 1 ]
– I N F d B 0 . 0 d B
[ I N 1 ] O U T 1 ]
– I N F d B 0 . 0 d B
[ I N 1 ] O U T 8 ]
– I N F d B 0 . 0 d B
7.3. Input/Output Channel Gain Setting Screen Operation
Perform the "Input Channel Gain Settings" (p. 40) and "Output Channel Gain Settings" (p. 42).