Toa P-924MK2 - Manual (Page 15)

15
P-906MK2 P-912MK2
120 V AC, 60 Hz
60 W RMS 120 W RMS
100 W 180 W
70 W 105 W
(D): 20 – 20,000 Hz, 0.5% THD
(T): 50 – 20,000 Hz, 0.5% THD
(D): 20 – 20,000 Hz, ±1 dB
(T): 20 – 15,000 Hz, ±1 dB
(T): 20 – 20,000 Hz, +1 dB, –3 dB
0.01% at 1 kHz, rated output
One input port: port accepts any input module except T-01.
One direct input
Note: Use of direct input prohibits use of modular input port.
Input port: 100 mV or 1000 mV (switchable) / 10 kΩ
Direct port: 100 mV or 1000 mV (switchable) / 10 kΩ
Main (T): 8 Ω, 25 V and 70 V, balanced
Main (D): 4 Ω, unbalanced
(D): Less than 0.5 dB, no load to full load
(T): Less than 1.0 dB, no load to full load
Input level switch in 0 dB (1000 mV) position: 108 dB
Input level switch in –20 dB (100 mV) position: 90 dB
1 Input gain control, 1 Input level switch, 1 Power ON/OFF switch,
1 Low-cut switch
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Self-protection, with AC fuse (inside)
Input: card-edge connector and screw-terminal strip
Output: screw terminal strip
AC outlet: 3-pin grounding type
AC power cord/plug: SJT, 3-prong type
–10 to +60 °C (12 to 140 °F)
Output disconnected for approx. 5 seconds after switching power on.
Black
420 (w) x 99.1 (h) x 358 (d) mm (16.54" x 3.9" x 14.09")
9.1 kg (20.06 lb) 10.9 kg (24.03 lb)
Model No.
Power Source
Rated Output
Power Consumption
Rated output
Based on cUL standards
Power Bandwidth
Frequency Response
Total Harmonic Distortion
Input
Input Sensitivity/Impedance
Output
Output Regulation (1 kHz)
S/N Ratio
(Band pass: 20 – 20,000 Hz)
Control
Indicator
Protection
Connector
Operating Temperature
Other Feature
Color
Dimensions
Weight
11. SPECIFICATIONS
Notes
• The design and specifications are subject to change without notice for improvement.
• (D): Direct output, (T): Transformer output
• Accessories
Volume control cover YA-920 .................... 1
Blank panel ................................................ 1
Machine screw M3 x 8 ............................... 2
• Optional product
Rack mounting bracket: MB-25B
11.1. P-906MK2, P-912MK2