Toa A-230 HV - Manual (Page 8)

Model No. A-230 HV
Power Source 220 – 230 V AC or 12 V DC
Rated Output 30 W
Power Consumption
(EN60065)
34 W
DC Current Consumption
(at rated output)
4.5 A
Frequency Response 50 – 20 kHz, ±3 dB
Distortion Less than 1% at 1 kHz, 1/3 Rated Power
MIC 1 –60 dBV (1.0 mV), 600 Ω, Unbalanced, Phone jack
MIC 2 –60 dBV (1.0 mV), 600 Ω, Unbalanced, Phone jack
MIC 3 –60 dBV (1.0 mV), 600 Ω, Unbalanced, Phone jack
AUX –20 dBV (100 mV), 10 kΩ, Unbalanced, RCA pin jack
Speaker Out All Speaker Outputs are Floating Balanced
100 V 330 Ω
4 Ω 11 V
S/N Rasio
Over 60 dB (MIC1,2,3)
Over 70 dB (AUX)
Tone Controls
Bass: –10 dB at 100 Hz
Treble: –10 dB at 10 kHz
Muting
MIC1 overrides other Mic inputs and AUX input with 0 – 30 dB
attenuation by MIC 1 input signals.
Indicators Power LED, Signal LED
Finish
Panel: ABS Resin, Black
Case: Steel Plate, Black
Dimensions 350 (W) x 100 (H) x 240 (D) mm
Notes
* 0 dBV = 1 V
* Specifications are measured on 230 V AC.
* The design and specifications are subject to change without notice for improvement.
533-01-066-20
URL: http://www.toa.jp/
11. SPECIFICATIONS
Inputs
Outputs