Tonearm and pick-up cartridge – THORENS TD 2015 User Manual
Page 28
28
Tonearm and Pick-Up Cartridge
Fig. 3
The following instructions apply only to turntables
delivered with a pre-installed TP 92 tonearm.
➔
Fig. 3
The tonearm counterweight has been removed for
shipping. Screw the counterweight onto the rear end of
the tonearm and adjust the tracking force.
➔
Page 31
The TP 92 tonearm can accommodate most pick-up
cartridges with a distance of 12.5 mm (½ ”) between the
mounting holes.
To connect the pick-up cartridge, push the four colour-
coded cartridge tags onto the cartridge pins.
If the cartridge pins are not colour-coded, connect them
as follows:
R
right channel (signal) ➔ red
G
right channel (earth) ➔ green
L
left channel (signal) ➔ white
G
left channel (earth) ➔ blue
This manual is related to the following products: