beautypg.com

ThermoWorks 226-275 4-CHANNEL PRINTING TEMPERATURE RECORDER - PTR Quick Start Guide User Manual

Page 7

background image

7

STOP button once. To stop logging, press the START STOP button, 'Stop Log?' will be
displayed. Press the START STOP button again to confirm the log is to be stopped.
The log MUST be stopped before the instrument can be switched off.
'LOG' MODE
The print button is disabled and the printing is automatically timed at set intervals
selected by the user. If there is no paper loaded or printer cover is open, 'Paper out'
will be displayed, but the reading will still be stored. When a roll of paper is placed
in the instrument and the printer cover is closed the stored readings will be retrieved
and printed in sequence.

When 'log mode' is first set-up with the PC software the instrument will display
'ready'. All button functions are retained. The LIMITS/START STOP button is used
to start and stop logging. To start logging, press the START STOP button once. To
stop logging, press the START STOP button, 'Stop Log?' will be displayed. Press
the START STOP button again to confirm the log is to be stopped. Once a log has
been started, the log MUST be stopped before the instrument can be switched off.

All stored readings can be retrieved later using the printing thermometer PC software.