ThermoWorks QUADTEMP2000 TEMPERATURE DATA LOGGERS - Manual (Page 13)

Page 12
ThermoWorks QuadTemp2000
Device Menus
Device Status Menu
Information such as current recording status, reading rate, stop date
and time, and calibration information can be found in the Device
Status Menu.
To access the Device Status Menu from the Home Screen:
1. Press to enter the Main Menu
2. Use to highlight Status
3. Press to enter the Device Status Menu
Status – Device’s current recording status.
Running - device is actively recording data
Stopped - device is not actively recording data
Delay - device is in Delay Start mode (start scheduled for future)
Manual - device is in Manual (push-button) Start mode
Memory Left – Percentage of memory available to store readings
Readings – Number of readings currently stored in device’s memory
Rate – Reading rate (configurable using data logger software)
Wrap – Memory wrap (configurable using data logger software)
Enabled - when memory is full device will overwrite oldest data
Disabled - when memory is full device will stop recording data
Start Date/Time – Date and time device began recording data
Stop Date/Time – Date and time device will stop recording data (due
to full memory or other user configured parameter)
Reading Date/Time – Date and time of last recorded reading