beautypg.com

Quick start guide – ThermoWorks THERM-A-LERT WIRELESS TEMPERATURE & HUMIDITY LOGGERS User Manual

Page 3

background image

Quick Start Guide

40

0’ outdoors or 150’ indoors

“On” Switch

4

Plug additional RFC1000 repeaters into wall outlets.

5

Flip the black switch on the back of the Therm•A•Lert to the on
position (0 is off, 1 is on)

6

A Therm•A•Lert icon will automatically appear in the software, showing the
device is recognized

Note:

The red LED will illuminate to signify the RFC1000 has been connected correctly.

Determine the distance from the remote RFC1000’s to the base module. If the distance is
greater than 150 feet indoors, or 400 feet outdoors, or there are walls/obstacles/corners
that need to be maneuvered around, setup additional RFC1000-Repeaters as needed.