ThermoWorks TX-1200-BK DOT - Manual (Page 2)

CURRENT
ALARM
NO PROBE
LOW BAT
CURRENT
ALARM
NO PROBE
LOW BAT
ALARM
L
Current temperature is displayed
with big digits for easy reading.
DOT will read within ±1.8˚F even
after changing probes.
Probe is not connected or has
failed. Make sure plug is fully
inserted.
Time to change batteries.
With the alarm enabled your alarm
temperature will be displayed here.
DOT will also display ‘OFF’ when
the alarm is disabled.
Use the arrows to set your alarm
temperature. Any button press
will mute an active alarm. Alarm
display will continue to flash. To
turn the alarm function off, press
both arrows at the same time, the
display will say “OFF”. Press both
arrows again to turn alarm function
back on.
CURRENT
ALARM
NO PROBE
LOW BAT
Needle Probe
Excellent choice for cooking thick, or thin portions. Also, ideal for monitoring the
internal temperature of food during sous vide cooking. Needle probe delivers Super-Fast
2-second response. Model #TX-1002X-NP
Press to turn DOT on. Press and
hold for 3 seconds to turn DOT off.
High Temp 12” Probe
Great for larger cuts of meat, or deep insertion into soup urns, or hot holding tanks.
Durable, fast and accurate. Model #TX-1005X-12
High Temp Cooking Probe
The durable High Temp Cooking Probe is
more accurate, delivers faster readings
and has a wider temperature range than other probes sold with
“low-cost” houseware temperature alarms. The “L” shape allows for
easy insertion and removal. Model #TX-1001X-OP
High Temp Air Probe & Grate Clip
Ideal for monitoring the ambient temperatures in the oven or
smoker. With the included grate clip, monitor ambient temperatures
inches away from where your food is actually cooking.
Model #TX-1003X-AP
High Temp Straight Penetration Probe, 4.5”
Included with DOT, the durable High Temp Straight Penetration Probe delivers better
accuracy, faster readings and a wider temperature range than probes sold with “low-
cost” houseware temperature alarms. Model #TX-1004X-SP
Optional Pro-Series Probes
Press and hold for 6 seconds
on power up to switch between
Celsius and Fahrenheit.
Pro-Series Probes available at www.thermoworks.com/dot
REAR VIEW