Casio PX-310 - Manual (Page 27)

E-25
Other Settings
Changing the Piano Key
Use this setting to raise or lower the overall key of the
keyboard in semitone steps.
1 Holding down the FUNCTION button,
press the TRANSPOSE buttons to raise or
lower the overall key of the keyboard.
NOTE
• To return the piano key to C, hold down the
FUNCTION button and press the TRANSPOSE
[
] and [ ] buttons at the same time.
• After using Transpose to raise the keyboard to a
high key, notes played at the highest range of the
keyboard may not sound properly for certain tones.
Changing the Pitch of the Piano
to Match Another Instrument
Use this setting to raise or lower the overall pitch of
the piano. The setting range is plus or minus 50 cents
(100 cents = 1 semitone) from the standard pitch of
A
4 = 440.0Hz.
1 Holding down the FUNCTION button,
press the TUNE buttons to raise or lower
the overall pitch of the piano.
* Each press of the button changes the current setting by
approximately 1 cents (1/100 semitone).
NOTE
• Holding down the FUNCTION button and pressing
the TUNE buttons [ ] and [ ] at the same time
returns tuning to the standard A 4 = 440.0Hz.
407A-E-027B
Using Digital Piano Setup
Memory
When setup memory is turned on, the digital piano
will remember its setup* whenever you turn it off. If
you turn off setup memory, settings will be cleared
when you turn off the digital piano.
1 While holding down the FUNCTION
button, press one of the keyboard buttons
shown below to turn setup memory on or
off.
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical
instruments and computers (machines) produced by
different manufacturers.
NOTE
• For detailed information about MIDI Implementation,
visit the CASIO website at: http://world.casio.com/.
On:
Off:
▲
C 1
▲
C 2
▲
C 3
▲
C 4
▲
C 5
▲
C 6
▲
C 7
▲
C 8
[ ] : Raise
[ ] : Lower
[ ] : Raise
[ ] : Lower
Turning off the digital piano while in the rhythm
mode
The next time you turn on the digital piano, non-local
control setting (see “Using MIDI” below) will be
configured in accordance with setup memory.
Turning off the digital piano while in the user song
mode
The next time you turn on the digital piano, the
following settings will be configured in accordance
with setup memory.
Rhythm selection, accompaniment volume, keyboard
touch, pedal type, damper pedal setting, layered tone
volume balance, split point, send channel, accomp
MIDI out