Speaker settings, Audio settings, Parental settings – COBY DVD-283 User Manual
Page 28: Setup

Page
Coby Electronics Corporation
www.cobyusa.com
Page
Page
Coby Electronics Corporation
www.cobyusa.com
Page
SETUP
Item
Description
Default Setting
Screen Saver
The screensaver prevents burn-in damage to
television displays.
On
Last Memory
Set the Last Memory function on or off.
On
Speaker Settings
Use the Navigation Keypad to highlight the desired speaker selection and press
to confirm.
Item
Description
Default Setting
3D/EQ
Sets the audio equalizer option (Off, 3D, Rock,
Classic, Jazz, Pop).
Off
Reverb
Sets the audio reverb effects option (Normal,
Living Room, Hall, Arena, Cave, Concert Hall,
Bathroom, Church).
Off
Audio Settings
Use the Navigation Keypad to highlight the desired audio selection and press
to confirm.
Item
Description
Default Setting
Digital Output
Sets the digital audio output signal type (PCM,
RAW, OFF). For use with digital decoding
receivers (see your receiver’s manual for more
information).
RAW
Channel Output
Sets the audio channel mix mode (LT/RT, Stereo).
Stereo
HDMI Audio
Set the HDMI audio function on or off. Turn HDMI
Audio off to use HDMI video with an alternate
audio connection (e.g., Coaxial Digital Audio).
On
Parental Settings
Use the Navigation Keypad to highlight the desired parental selection and press
to confirm.
Item
Description
Default Setting
Password
You must input the four-digit password to access the Parental settings.
The initial password is 8888.
Change Password
Enter the old password, the new password, and then the new password
again to verify and change the Parental Settings password. Restoring the
player’s default settings will not reset the password.
DO NOT FORGET
THE PASSWORD; this password cannot be reset.