Software version, Specifications – TechniSat DigitRadio 50 User Manual
Page 22
22
>Rotate Tune / Select ( 4) to run the reset to factory setting ( Yes ) or to cancel (No).
>Confirm by pressing Tune/ Select (4).
When running the factory setting, the device restarts and is after that in standby
mode.
>Switch the device on by pressing Volume / standby ( 3 ) and then proceed as de-
scribed under initial installation.
Software version
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point SW version.
>Now press Tune/ Select ( 4).
>Leave the display by pressing Mode / Menu (2).
Specifications
Frequency Range: DAB / DAB + 174.928 - 239.200MHz FM ( FM ) 87.5- 108MHz
-
Audio output: 0.8 Wrms
-
Power Supply Input: 100-240 VAC, 50 -60Hz
-
Output: 6 V DC / 500 mA
-
Dimensions : 175mm x 95mm x 85mm
-