Display, Fm mode automatic tuning – TechniSat DigitRadio 50 User Manual
Page 13

13
>Now press Tune/ Select ( 4).
>Select by rotating Tune / Select (4 ):
Yes, if you remove the transmitter
•
No if you want to cancel.
•
>Confirm your selection by pressing Tune/ Select (4).
Display
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point display.
>Press Tune/ Select ( 4).
>Select by rotating Tune / Select (4) the display, which will be shown in the bottom
line and press to confirm Tune / Select (4).
Signal strength - Signal strength
•
Program type - PTY
•
Ensemble - Ensemble, to which the radio belongs
•
Frequency - Frequency at which the radio station is transmitted
•
Signal quality - signal quality at
•
Codec and bit rate - bit rate and encoding of the data transmission
•
Date - the current date
•
Scrolling text - text transmitted by the radio station, such as Title / Artist
•
FM mode
Automatic Tuning
>Press Tune/ Select ( 4) to search automatically for the next station and play.
Please refer to the setting in the point - search settings. Depending on the setting
and reception quality at the site either stations may be skipped or very poorly repro-
duced. In this case try to align the wired antenna differently and/or change the search