TechniSat DIGIT ISIO S2 - Manual (Page 36)

36
> Select Save to save the recording, or Discard not to save the recording, or Back
to continue with the recording.
8.4 Automatically end recording
Option 1
> Press the On/Standby button. A request is now displayed asking what should happen
to the recording in progress.
> Select the line with the option you want.
8.5 DVR playback
You can access DVR recordings via the DVR Navigator.
8.5.1 Calling up the DVR Navigator/Starting DVR playback
The DVR Navigator can be called up in the following ways. Depending on whether you are
currently in TV or radio mode, a list will appear of the existing TV or radio recordings on
an inserted USB memory device or an inserted SD/MMC card or an available network drive.
When doing so pay careful attention to the information and settings for global and user-
dependent parental control under section 15.2.
The broadcast information can be displayed and hidden by pressing the Info button
repeatedly.
> You can start to play back a recording by highlighting it and confirming with OK.