Front panel – TC-Helicon VoiceTone Harmony-G Manual User Manual

Page 12

6. Preset Select Button and Preset Display

Press to cycle through the 5 presets numbered 1 to 5 shown
in the Preset display. Hold to store changes you make.The
sharp sign (#) is used in the Tuner and Manual modes.

7. 48 Volt Phantom Power LED

For condensor mics, hold the Manual and Double buttons
for 2 seconds to engage and disengage phantom power.

8. Manual Mode Button

Press to toggle guitar control of the harmonies. See how
to use this feature in the “For Advanced Users” section.

9. Double Voice Button

Press this button to simulate the sound of you singing
along with yourself for added thickness.

10. FX Button and LED Display

Pressing the FX button cycles through the effect styles
and FX Off (no LEDs lit) for the current preset.

11. Stereo Select Button

Press and hold the Voice 1 and Voice 2 buttons for 2
seconds to toggle between stereo and mono output.

12.Voice Buttons and Display

Press either of the Voice 1 or Voice 2 buttons to:

a) change the associated voice’s harmony interval
b) enable the harmony voice when its LED is off
c) turn the voice off

The same interval for both voices adds thickness to the
harmony voices.

Front Panel

Preset

Manual

Double

Voice 1

Voice 2

Hall
Room
Echo
Slap
Combi
SFX

Higher
High
Low
Lower
Bass
Octave

48V

Stereo