TC-Helicon VoicePrismPlus Manual - Manual (Page 20)

UTILITY BUTTON
MIDI CONFIGURATION
The
MIDI FILTER
parameter, under the
MIDI
menu, has been
updated so that you can filter out incoming System Exclusive
messages and MIDI Program Change messages. This param-
eter can be set to an '
OFF
' position, where no filtering takes
place, or you can have both filters '
ON
' at the same time.
DIGITAL I/O
DIGITAL I
/
O
is a new menu, used for setting the
SAMPLE RATE
of
the digital signal, and the type of dithering employed in the
digital domain. You can choose from 44.1
K
H
Z
, or 48 KH
Z
sam-
ple rates, or
EXT
for an external sample rate, either 44.1KH
Z
or
48KH Z
. On the front panel lens, if you are synchronized at 44.1
KH Z
, a 44.1K indicator will light. If you are synchronized at
48KH
Z
, a 48K indicator will light. If you are
not linked to a digital signal properly, both
indicators will flash.
DITHERING
can be set to 8 , 16 or 20 bits, or an
'
OFF
' position.
% 20 %
VoicePrism Plus User Manual Utility Button