TC-Helicon VoiceLive 3 - Firmware 1.2 Manual Addendum (MIDI Sync) - Manual (Page 6)

MP-76 Support
VoiceLive 3 Reference manual – firmware 1.2 addendum – 2015-03-17 4
In practice, it’s pretty cool. You can…
► play audio and control the tempo from your
DAW,
► have your Guitar and Vocal Delay and Rhyth-
mic effects line up with the audio track
► record and play back loops in time with your
DAW audio tracks.
In short: VoiceLive 3 and a laptop just became a
much more powerful music presentation setup!
MP-76 Support
We have added support for our MP-76 micro-
phone to VoiceLive 3. Now you can control any
of the vocal effects or create loops directly from
the mic.
Setting up MP-76
On the VoiceLive 3 INPUT tab, choose MP-76
from the INPUT TYPE menu.
Here is a list of available MP-76 targets:
► µMod
► Delay
► Reverb
► Vocal HIT
► Double
► Harmony
► Transducer
► HardTune
► Rhythmic
► Stutter
► Choir
► Synth
► Harmony Hold
We have tweaked Harmony Hold to automati-
cally turn on Harmony, if it isn’t on already.
That saves you a button press!
► STEP
► Tap Tempo
► Bypass
Bypass can be used as a MUTE if you set
TALK TRIM to OFF in the SETUP menu.
► ALL HIT
► Preset UP/DN
Use Preset UP/DN as follows to scroll
through VoiceLive 3 presets:
► Tap to use Preset UP
► Hold to change directions
► Tap to use Preset Down
► Repeat hold to change direction again
► Preset Step
► Hold to change preset
► Tap for STEP
► Tuner
► 1 Button Looper
Control the Looper with just one button! Here
is how it works:
► Tap for REC/PLAY/ODUB
► Double tap for STOP
► Double tap and hold for CLEAR
Please note that with any one-button looper,
there is a small “burp” of audio if you dou-
ble-tap and hold for erase when the loop is
stopped (not if it’s playing). If you want to
avoid this, you will need to map STOP/ERASE
to a dedicated button instead.
► Loop PLAY/REC (Oudb)
► Loop STOP/ERASE
► Loop UNDO
► Preset UP
► Preset DOWN
All MP-76 targets can be set to Latched (tap on/
tap off) or momentary (hold on/release off).