SUUNTO SOLUTION Alpha - Manual (Page 12)

12
It is also possible to simulate repetitive dives and to see how the SOLUTION
á
works e.g. during a decompression dive.
Exit the Dive Simulation Mode
You may any time exit the simulation mode by making contact between all three
water contacts. This is most easily done by first covering the TIME/MODE and
ON/PLAN contacts with your right thumb and then touching the COM contact with
your left thumb. As usual, it helps if your fingers are wet or moist. This procedure will
bring you back to the normal READY mode. The SOLUTION
á is now ready for a
dive. It will automatically switch off in about 10 minutes of surface time in case you
do not use it any more and no real dives have been performed.