Diving, Diving-related information – SUUNTO HELO2 User Manual

Page 58

6. DIVING

This section contains instructions on how to operate the dive computer and interpret
its displays. The dive computer is easy to use and read. Each display shows only the
data relevant to that specific diving mode.

6.1. Diving-related information
This section contains information on diving with gas mixes. To activate the MIXED
GAS DIVE mode, please refer to Section 5.9.1. Accessing DIVE mode.

DIVE HAS JUST BEGUN AND

AVAILABLE NO-DECOMPRESSION

TIME IS OVER 199 MINUTES SO NO

VALUE IS DISPLAYED.

NOTE

The dive computer will remain in the SURFACE mode at depths
less than 1.2 m/4 ft. At depths greater than 1.2 m/4 ft the instru-
ment will go into the DIVE mode automatically. However, it is re-
commended that you activate the SURFACE mode manually
before entering the water in order to perform the necessary dive
pre-checks.

NOTE

The default fields shown on your dive computer in the DIVE mode
are the ones you select while in the SURFACE mode.