Setting the tank pressure, Setting the hp code, 46 5.8.8. setting the hp code – SUUNTO HELO2 User Manual

Page 46

Text mode
Original mode

The 50 bar/700 psi alarm, however, is fixed and cannot be changed. You cannot ac-
knowledge this alarm.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.7. Setting the tank pressure
The wireless transmission can be set “ON” or “OFF” depending whether the wireless
pressure transmitter is used or not. No cylinder pressure-related data is shown, nor
data reception made, when this selection is “OFF”.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.8. Setting the HP code
The HP Code setting allows you to verify the selected code and to erase the stored
code. It also enables re-pairing if necessary.