beautypg.com

Setting the sample rate, Setting the tank pressure alarm, 45 5.8.6. setting the tank pressure alarm – SUUNTO HELO2 User Manual

Page 45

background image

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.5. Setting the sample rate
The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
You can set the dive profile sample rate to 10, 20, 30, or 60 seconds. The factory default
setting is 20 seconds.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.6. Setting the tank pressure alarm
The tank pressure alarm can be set "ON" or "OFF" and in the range of 10–200 bar.
The alarm is the secondary cylinder pressure alarm point. The alarm is activated when
the tank pressure drops below the set limit. You can acknowledge this alarm.

45

See also other documents in the category SUUNTO Sports and recreation: