Crimestopper Security Products RS-00 - Manual (Page 17)

17
Option
#
Option Description TX Button #1
TX Button #2
Default Value
TX Button
#3
TX Button
#4
9 Brown wire function Dome Light *Trunk pop*
Press and
Hold
10
“Wake Up" pulse on Unlock
(1-sec. +12V to IGN)
ON *OFF*
11 Manual Transmission Mode ON *OFF*
12 Yellow/black wire function Anti-Grind *Ignition Output*
13 Horn Chirp Confirmation 1 Press *2 Press*
14 Unlock with Trunk Pop Unlock/Trunk pop *Trunk pop only*
15 Timed Crank or Tach Monitor Pre-Set *Tach Monitor*
16 Horn Pulse (Chirp) Long 0.04 Sec.
*Short 0.02
Seconds*
17
OEM Interface Green input wire
(RS-1300DP)
3 pulse *1 Pulse*
18
Starter Cranking Time
(Option #15 is set to Timed Crank)
0.75 Sec. *0.5 Sec.* 1.0 Sec. 1.5 Sec.
19 Diesel Glow Plug Delay 10 Seconds
*Monitor Glow
Plug
20 Seconds 30 Seconds
20 Remote Start Engine Run Time 12 Minutes *24 Minutes* 36 Minutes 48 Minutes
21
Smart Tachless Voltage Adjustment
79-100%
-1% +1%
Set to 93%
default
22 Turbo Timer Mode 1 to 5 Minutes
Brake Pedal Set
Mode
*Always Set Mode*
Idle Down
Mode
23 Reset Options to default (*) *Reset All Options*
OPTION DESCRIPTIONS:
1. Engine Monitoring:
This option sets how the unit monitors your engine. You can program either for Tach mode in which the unit uses a Tach
signal (RPM) or for Tachless mode that monitors voltage level. See pages 12-15 for more information and additional
steps for actual Tach learning and Tach finder modes.