Sure Heat Sonoma SGIR27 Natural Gas Conversion Kit - Manual (Page 6)

7. Attach the 3/8" nipple to the 3/8" street elbow.
(See Fig. 25)
8. Attach the NG regulator to the nipple
(See Fig. 26).
Note: pay attention to arrow on the NG
regulator indicating direction of gas flow.
The arrow should point toward the grill.
Remember to apply pipe dope!
9. Attach one end of the supplied hose to the flared
fitting on the side of the “T” connector.
(See Fig. 27)
The other end of the hose will be attached to the
side burner later.
10. Replace the grommet in the side of the cart by
pressing with your fingers.
(See Fig. 28)
This completes the NG regulator installation.
Converting the Side Burner to NG
1. Remove side burner grate, porcelain cap and
burner head. (See Fig. 29)
2. Remove the LP regulator hose attached to the
side burner LP valve assembly. (Located on the
under side of the side burner.) (See Fig. 30)
3. Remove the control knob from the front of the
side burner. (It should pull off by hand.)
(See Fig. 9 on page 3)
6
SGIR27 Natural Gas Conversion Instructions
Fig 25
Fig 26
Fig 27
Fig 28
Fig 30
Underside of side
burner shelf
Fig 29
Valve Assembly