Sure Heat Tuscany CS812 Natural Gas Conversion Kit - Manual (Page 6)

Note: Make Sure to use thread Sealing tape on
all non-flared fittings.
27. Attach the tee fitting to the manifold as shown.
Tighten with wrench. (See Fig. 18)
28 .Attach the Connector 3/8” NPT x 3/8” UNF to
the tee fitting as shown. Tighten with wrench.
(See Fig. 19)
29. Attach the NG regulator to the tee fitting.(See
Fig. 20)
Note: pay attention to arrow on the NG regulator indi-
cating direction of gas flow. The arrow should point
toward the grill.
30. Attach the other end of the side burner hose to
the flare fitting on the side of the tee connector.
(See Fig. 21)
31. Reattach all the control knobs in position.
Note: At the completion of the conversion, a leak
test should be performed on all fittings. See Use
and Care manual for leak testing procedure.
Installation is now complete.
Enjoy your grill safely.
6
CS812 Natural Gas Conversion Instructions
Fig 18
Fig 19
Fig 20
Fig 21
arrow on
the back of
regulator
Conversion Kit Assembly Picture