Sure Heat Sonoma PF30LP - Manual (Page 20)

Care and Maintenance
IMPAIRED VENTILATION OF HOT AIR FROM GRILL - In order for the burners to function
properly, hot air created by the burners must have a way to escape, the burners may become
deprived of oxygen, especially if the burner output is set at HIGH. This is the reason your grill
was designed with ventilation louvers. These design features give the hot air an escape route.
Accordingly, never operate your grill with very little or no open space at the cooking surface (the
cooking grids provide sufficient space). Also, never cover the ventilation louvers with foil or other
materials that prevent air flow. Specifically, do not cover the entire surface with foil, a large pan, etc.
GENERAL MAINTENANCE
- Keep outdoor cooking gas appliance area clear and free from combustible materials, gasoline and
other flammable vapors and liquids.
- Do not obstruct the flow of combustion and ventilation air.
- Keep the ventilation openings of the cylinder enclosure free and clear from debris.
- Visually check the burners
Normal: Soft blue flames
O u t o f A d j u s t m e n t : H a r d b l u e
flames- too much air
Poor Combustion: wavy, yellow
flames- too little air
20
GENERAL CLEANING
IMPORTANT: Before cleaning, make sure all controls are off and the grill is cool. Always follow label
instructions on cleaning products.
For routine cleaning, wash with soap and water using a soft cloth or sponge. Rinse with clean water
and dry at once with a soft, lint-free cloth to avoid spots and streaks.
To avoid scratching the surface, do not use steel wool to clean the grill.
Use the vinyl grill cover to protect finish from weather.