Sure Heat Sonoma PF30LP - Manual (Page 10)

Grill Assembly
10
SIDE BURNER PARTS ASSEMBLY
6. Use two screws remvoed in step 5 to secure the
orifice backet on the side burner tray. (See Fig. 11)
Note: Add lock washer when installing the screws in
position.
7. Slide the side burner valve stem through the center
hole in the front of the shelf.Insert one valve screw
through the bezel and in to the side burner valve
and tighten. Next, install the second valve screw
through the bezel and tighten. Make sure the bezel
is installed with the "OFF" position facing up. Install
control knob, making sure to line up the flat side of
the valve stem with the flat side of the knob stem.
(See Fig. 12)
8. Place the side burner grate in position. (See Fig.
13)
Note: Remove all the tape before using the grill.
Fig. 11
Screws
Orifice bracket underneath the side burner tay
Fig. 12
Fig. 13