Sure Heat Jenn-Air 38 - Manual (Page 7)

INSTALLATION / ASSEMBLY
Attaching Grill Head to Cart w/door (cont.)
3.
Have someone help you pick up the grill
and set it on the top of the cart, with the front
of the grill above the door opening. Make
sure the 4 bolt heads fall through the large
opening of the key hole slots in the top of the
cart. Slide the grill head backward so the
bolts are resting in the small opening of the
key hole slots. Tighten the bolts securely-
be sure not to over tighten and strip the bolts.
Next insert 4 hex head screws into grill
bottom through cart. (See Fig. 5)
Note: This is a very heavy step that requires
two individuals to complete.
Installing the Cart Door
1.
First set the nylon shoulder washer (see
diagram below) into the hole in the cart base.
While holding the door insert the bottom
nylon pin into the hole in the base of the cart
Next place a nylon bushing onto the top pin,
then depress the pin and insert into the hole in
the bottom of the grill. (See Fig. 6)
6
Screw holes
Fig. 5
Use
back
set of
key
hole
slots
Fig. 6
Nylon Bushing
Nylon Shoulder
Washer
Lip
White shoulder
washer is round
with a lip to sit
over hole in cart
base.