Using the rotisserie burner – Sure Heat Jenn-Air 38 User Manual

Page 15

USING THE ROTISSERIE BURNER

Rotisserie Lighting

Open the lid. Push and turn the control knob counter

clockwise to the “HIGH” position. Wait 5 seconds.

Then press and hold the electronic ignitor button.

You’ll hear a snapping sound. If the burner does not

light in 4 seconds, turn the control knob to OFF and

wait 5 minutes before trying again. Once lit, turn the

control knob to the desired setting. (See Fig. 15)

(If the ignitor does not function, the burner can be lit

by holding a lit match to the burner while the control

knob is turned counter clockwise to “HIGH”.)

(See Fig. 16)

After the first use the stainless steel around the burner

will darken. This is a normal occurrence of the non-

rusting, type 304 stainless steel used on the grill. The

infrared panel will also darken after initial use. This

is a normal occurrence.

Fig. 15

Fig. 16

Note: Do Not operate the main burners

and infrared back burner at the
same time.