Sure Heat 2008 Four Seasons FS38 - Manual (Page 6)

Grill Assembly
6
a. Remove the four (4) wheel channel assembly nuts and
two (2) bolts from the wheel channel assemblies.
Note: The bolts are hand tightened to the wheel channels.
b. Set the Cart Base (1A) on the floor and then lay the
Wheel Channel left (1B) on the left side and the Wheel
Channel Right (1C) on the right side of the cart base.
The rubber door stops should be facing the front.
c. Pick up the left side of the cart base and set the caster
assembly left in place by inserting the attached bolts
through the two (2) holes in the cart base.
d. Pick up the right side of the cart base and set the
caster assembly right in place by inserting the
attached bolts through the two (2) holes in the cart
base.
e. Pull the Tank Tray (1D) out of the Slide Rail Brackets
(1E), then place it on the Cart Base, the handle of the
tray facing Front. Attach three (3) self-tapping screws
through the pre-drilled holes on the Left Bracket into
the Cart Base. Repeat on the Right Bracket. Then
Slide the tray back into the Bracket.
STEP ONE
1B
1A
1C
1E
1D