Sunny Health & Fitness SF-RB1117 - Manual (Page 2)

Before You Start
Tools
If required, most of our products are supplied with basic tools, which will
enable you to successfully assemble your product. However, you may
find it beneficial to have a soft-headed hammer and perhaps an
adjustable spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in a clean, clear,
uncluttered area. This will enable you to move around the product while
you are fitting components and will reduce the possibility of injury during
assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble this product with
the help of a friend as some of the components may be large, heavy or
awkward to handle alone.
Open the Carton
Carefully open the carton that contains your product, taking note of the
warnings printed on the carton to ensure that the risk of injury is
reduced. Be aware of sharp staples that may be used to fasten the flaps
as these may cause injury. Be sure to open the carton the right way up,
as this will be the easiest and safest way to remove all the components.
Unpack the Components
Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product.
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our customer
support team.
Page 1