Sunny Health & Fitness SF-RB1117 - Manual (Page 12)

Assembly & Adjustments
1. Unfold the Main Frame (1) and Rear Frame (2). Lock into position
using 1 x Locking Pin (12). Connect the Rear Stabilizer (3) to the Rear
Frame (2) with 2 x M8 * 55mm Carriage Bolts (13), 2 x M8 Curved
Washers (14), 2 x M8 Spring Washers (15) and 2 x M8 Dome Nuts (16).
Repeat for the Front Stabilizer and tighten all Nuts and Bolts securely.
2 . Assemble the Pedals (Left and Right) (5) to the Pedal Crank (6) (See
note below). Both pedals must be tightened securely; otherwise,
damage may occur to the Crank.
*
NOTE
*
The right pedal is marked with an "R" for the RIGHT SIDE of the cycle (if
you are sitting on the bike), and must be assembled by turning
CLOCKWISE. The left pedal is marked with an "L" for the LEFT SIDE of
the cycle (If you are sitting on the bike), and must be assembled by
turning COUNTER-CLOCKWISE to tighten.
Page 11