Sunny Health & Fitness SF-RB1117 - Manual (Page 13)

Assembly & Adjustments
3 . Remove the 3 x M8 Flat Washers (8a) and 3 x M8 Nylon Locknuts (8b)
from the Saddle (8). Fix the Saddle to the Saddle Support (7) and
reassemble the washers and nuts previously removed. Unlock the
Adjuster Knob (17) and slide the Saddle Support into the Main Frame.
Set the Saddle to the desired height, allowing for a slight bend in the
knee at the bottom of the cycle rotation. Re-tighten the Adjuster Knob
(17).
8
7
4 . Connect the Handlebar (9) to the Handlebar Support using 2 x M8 *
35mm Allen Bolts (18). Attach the Exercise Monitor (10) onto mounting
tab on the Handlebar (9). Connect the Sensor Wire (19) with Exercise
Monitor (10).
Page 12