SunBriteTV SB-HDWT Manual - Manual (Page 6)

2.4 HDWT-Tx Transmitter Controls and
Connections
FRONT PANEL
1. Power LED: Indicates that unit is powered
2. Video LED: Indicates that active HD source is connected
3. Link LED: Indicates wireless connection between HDWT-Tx and HDWT-Rx
receiver
4. USB Interface: Used for PC connection or other USB device, such as a
keyboard
BACK PANEL
5. IR IN: Connects to the supplied IR emitter
6. Reset button: Press to reset wireless connection. Holding this button down
for more than 5 seconds will turn the unit off.
7. HD IN: Connects to the video source device
(cable box, satellite receiver, etc.)
8. DC IN Jack: Connects to the power supply
2.5 HDWT-Rx Receiver Controls and
Connections
FRONT PANEL
1. Link LED: Indicates wireless connection between HDWT-Rx and
HDWT-Tx transmitter
2. Video LED: Indicates that active HDMI source is connected
3. Power LED: Indicates that unit is powered
BACK PANEL
4. HD OUT Jack: Connects to the video monitor/TV
5. AC POWER IN: Connects to the supplied power cord
6. USB Interface: Used for PC connection or other USB device, such as a
keyboard
6