StarTech.com PM1115U - Manual (Page 8)

Instruction Manual
5
Configuring the Print Server for Non-Windows Networks
The print server can be configured using any workstation or network that supports
the TCP/IP protocol. The default IP address on the print server is 192.168.2.2. If this
IP address is not compatible with your network, you can manually configure a single
workstation to a compatible IP address (such as 192.168.2.100) and connect the print
server directly to the workstation using crossover (also referred to as cross-wired)
Ethernet patch cable. Once you have configured a computer (or connected the print
server to the LAN, if it is compatible), you can access the print server’s integrated Web
configuration tool:
1. Open a Web browser such as Microsoft Internet Explorer or Mozilla Firefox.
2. In the address toolbar, enter http://192.168.2.2 as the Web site.
3. A dialog box will appear that prompts you for a username and password. Enter
admin as the user name, and 1234 as the password.
4. The following menu will appear that allows you configure the settings for the type
of network you are using: