StarTech.com WFREPEAT300N - Manual (Page 9)

Instruction Manual
6
Access Point Mode Setup:
1. Connect the Repeater to an available AC electrical outlet.
2. Wired Setup: Connect an RJ45 Ethernet cable from the Repeater to your computer.
Wireless Setup: Connect to the wireless network ‘WiFi-Repeater’.
3. The default IP address on the Repeater is 192.168.10.1; configure your computer to
a matching network address (192.168.10.x, where ‘x’ is between 2~255) with subnet
set to 255.255.255.0 and default gateway to 192.168.10.1.
4. Open a web browser window and enter 192.168.10.1 into the address bar. This will
bring up the login prompt for the Repeater. The default user name and password
are ‘admin’ (without quotes).
5. From the main menu of the Repeater configuration utility, click the ‘Setup Wizard’
link followed by the ‘Standard Wireless AP Mode’ option. Click ‘Next’ to continue.
6. The next screen will list some basic information. Click the ‘AP – OneKey Setting’
button to proceed.