beautypg.com

StarTech.com WFREPEAT300N User Manual

Page 10

background image

Instruction Manual

7

7. The Repeater will automatically pre-configure itself with default information and then

reboot. If there are multiple wireless networks or a problem occurs with the automatic

setup, Advanced Configuration may be required. Otherwise the setup is complete.

Note: Further instruction on Advanced Configuration settings for this device are

available on the following pages, if desired.

8. Once the device is configured, close your browser and connect an RJ45 Ethernet cable

from the Repeater unit to your switch/router (disconnect from the computer if you

used the Wired Setup in Step 2).