StarTech.com R300WN22OP5E - Manual (Page 10)

Instruction Manual
7
3. Enter the default username / password (admin / admin) and press Enter.
4. Select your desired Operation Mode and click the Change Mode button to apply
the change.
Note: The Change Mode button will automatically jump you to the Operating Mode
Settings page for the mode you have selected. In future visits to the web interface, use
the Setup button located next to the mode to open that mode’s configuration page.
Available Network / IP Modes
Note: Depending on the mode you choose, applicable settings will be enabled/
disabled automatically.
Network Mode Description
Access Point
Connects to an internal network (LAN) and broadcasts a wireless
network connection (WLAN)
Station
Acts as a wireless client, to connect a remote segment to an
existing WLAN
WDS Access
Point
Acts as the main base station for a Wireless Distribution System
mesh network
WDS Station
Acts as a remote base station in a Wireless Distribution System
mesh network
AP Router
Connects an external network (WAN) with an internal network
(LAN/WLAN), to allow cross-communication
Wireless ISP
Connects to an external wireless network (Wireless ISP) and
rebroadcasts as an internal wireless network (WLAN).